Thursday 8 October 2015

Basic Introduction to Simple Machines with Assignment (Quiz)



Simple Machine:      
A machine with few or no moving parts. Simple machines make work easier.

Compound Machine:       
Two or more simple machines working together to make work easier.
Examples: Wheelbarrow, Can Opener, Bicycle

Inclined plane:      
A sloping surface, such as a ramp. An inclined plane can be used to alter the effort and distance involved in doing work, such as lifting loads. The trade-off is that an object must be moved a longer distance than if it was lifted straight up, but less force is needed.
Examples: Staircase, Ramp, Bottom of a Bath Tub
Staircase
Lever:      
A straight rod or board that pivots on a point known as a fulcrum. The fulcrum can be moved depending on the weight of the object to be lifted or the force you wish to exert. Pushing down on one end of a lever results in the upward motion of the opposite end of the fulcrum.
Examples: Door on Hinges, Seesaw, Hammer, Bottle Opener

 
See Saw

Pulley:      
A wheel that usually has a groove around the outside edge. This groove is for a rope or belt to move around the pulley. Pulling down on the rope can lift an object attached to the rope. Work is made easier because pulling down on the rope is made easier due to gravity.
Examples: Flag Pole, Crane, Mini-Blinds
 
Crane

Screw:      
An inclined plane wrapped around a shaft or cylinder. This inclined plane allows the screw to move itself or to move an object or material surrounding it when rotated.
Examples: Bolt, Spiral Staircase
Screw


Wedge:       
Two inclined planes joined back to back. Wedges are used to split things.
Examples: Axe, Zipper, Knife
Axe


Wheel and Axle:      
A wheel and axle has a larger wheel (or wheels) connected by a smaller cylinder (axle) and is fastened to the wheel so that they turn together. When the axle is turned, the wheel moves a greater distance than the axle, but less force is needed to move it. The axle moves a shorter distance, but it takes greater force to move it.
Examples: Door Knob, Wagon, Toy Car
 
Wheel of a car





Simple Machine Quiz


1.  A fork is an example of a: 
pulley      wedge      wheel and axle 
 2.  A roller skate is an example of a: 
wheel and axle      wedge      lever 
3.  A ramp is an example of a/an: 
pulley      screw      inclined plane 
4.  The bottom of a light bulb would be considered a: 
lever      screw      wedge 
5.  A seesaw on the playground is a: 
lever      inclined plane      pulley 
6.  You would use a pulley to: 
 cut food      hold pieces of wood together 
help guide the sail on a sailboat 

No comments:

Post a Comment